info@lightningprotectiontestinguk.co.uk
  1. Home
  2. About Us

Worried About Lightning Damage? We Protect Your Property

UK Lightning Protection Company

Lightning Protection Contractors for Homes, Shops, Offices and Factories

Lightning Protection System Design, Testing and Surge Protection

  • Constructionline Gold Member
  • CHAS Standard
  • PQS Health & Safety Approved
  • SSIP Registered Member
  • CSCS
  • IPAF Member
Two branded Lightning Protection Testing UK vans parked outside a stone church under scaffold

We are a lightning protection company working across the UK. At Lightning Protection Testing UK, we design, install and check protection systems for detached houses, flats, period homes, hotels, restaurants, shops, offices, factories and clinics. Our dedicated team of specialist engineers looks after each job from the first visit to the final certificate.

One hit can wreck a roof, kill your alarms and fry every computer on site. We stop that from happening. Ask us for a free quote today.

Engineer in hi-vis fixing lightning conductor along a green-roof parapet, tower block behindWho we are
Clay tile roof with tall brick chimney stacks seen from a scaffoldHomes to factories

Why Lightning Protection Services Matter for Homes, Shops and Factories

The UK sees an estimated 200,000 to 300,000 lightning strikes each year. That is around 550 to 820 a day, though most arrive in bursts during storms. Around the world, lightning hits the ground about 100 times every second.

Some days are far worse. Between 17 and 21 July 2014, 62,277 strikes were recorded across the UK. On 9 August 2019, 12,370 strikes hit mainland Britain, and lightning-related faults played a part in a power cut that reached about one million customers.

This is why lightning protection matters. A storm does not need to be right above you either. If you can hear thunder, you are already close enough to be struck.

How Does a Lightning Strike Affect a Property?

+

Lightning is one of nature's destructive elements. The air around a lightning flash can reach temperatures of 30,000°C, about five times hotter than the surface of the Sun. A single bolt can carry up to one billion volts.

The channel looks wide, but it is only 2 to 3 centimetres across. It can stretch for 2 to 3 miles and the discharge moves at around 270,000 miles per hour. A poor set-up can lead to cracked brickwork, fire and severe structural damage.

Is a Direct Hit the Only Risk to Your Electronic Equipment?

+

No. A strike can send energy along power, phone and data cables and push damaging voltage spikes into nearby properties. That puts your electronic equipment, alarms and control panels at risk, even when the roof is untouched.

If your business depends on tills, servers or machines, one spike can stop trade for days. The value of the kit inside premises is increasing year on year. Changing weather patterns make it hard to say where the next thunder storm will land.

Not sure what your building needs?Tell us about the site and we will tell you plainly what is worth doing.

What Does a Lightning Protection System Do, and What Can It Not Do?

A lightning protection system gives a strike a safe path to earth. It catches the current, carries it down and spreads it safely into the ground. It does not attract lightning, and no system can promise a structure will never be struck.

What it does is cut the chance of fire, dangerous sparking, data loss and harm to people. We plan for both the outside and the inside of the structure in every design.

What Parts Make Up a Lightning Protection System?

+

The outside set-up has air terminals on the roof, down conductors along the walls and earth electrodes in the soil. Many people call the roof part a lightning conductor. We also bond nearby metal parts together, so no dangerous voltage gaps appear inside.

On a historic building, we fix each lightning conductor so it hardly shows. The job is to protect the structure without spoiling how it looks.

How Do Earthing Systems and Surge Devices Work Together?

+

The outside set-up handles the main current, and earthing systems give it somewhere safe to go. Surge protection devices then stop voltage spikes reaching the wiring inside. Many owners miss this aspect.

One device rarely covers everything. We often fit coordinated Type 1, Type 2 and Type 3 devices at different points, which gives your electronic equipment better protection. We follow BS 7671:2018+A4:2026, the current UK Wiring Regulations.

Engineer fitting an air rod on a flat roof beside solar panelsAir terminal
Two engineers in orange hi-vis at an earth inspection pit with a generatorOur services

Which Lightning Protection Services Do We Offer Across the UK?

Our lightning protection services cover the whole job, from the first check to the paperwork at the end. Here is what we offer:

  • Risk assessment to work out what your site needs
  • Design and installation of new systems
  • Testing, including earth testing, on existing systems
  • Maintenance and upgrades for older systems
  • Inspection after a strike

You pick what you need, and we do the rest.

BS EN 62305Testing, installation and maintenanceOne team for the whole job, from the risk assessment to the certificate.
NationwideOffices in Darlington and London
SSIP approvedCHAS, PQS and Constructionline Gold

Which Properties and Situations Lead People to Call Us?

Homeowners and business owners call us for different reasons, but the worry is the same. They want the next storm to pass without a bill. Our domestic and commercial clients get the same care.

What Do Homeowners Usually Ask Us For?

+

Most call after a storm hits close by, or after an insurer asks for a certificate. Detached houses on high ground, period homes with tall chimneys and flat blocks with exposed roofs are common. Others are adding an extension, or find an old installation with no test record.

What Do Hotels, Restaurants, Shops, Offices, Factories and Clinics Need?

+

A restaurant loses its tills and card machines. A factory line stops, and a clinic cannot risk losing power or records. In the event of a close strike, each of these sites needs a safer environment for staff and visitors.

Churches, manors and other historic buildings call us too. These need care, because the fabric matters as much as the cover.

Engineer at the battlements of a stone tower with test kitChurches
Aerial view of a large factory site with production buildings and yardsLevel of cover

How Do We Decide the Right Level of Cover for Your Site?

Every job starts with a lightning risk assessment. We check height, location, construction, materials, use and the cables that enter the premises. We also check a lightning strike atlas for your area. The atlas shows how often storms hit nearby.

The main UK framework is the British Standard BS EN IEC 62305:2024, a four-part series. It covers general principles, risk management, physical damage and life safety, and the electrical and electronic systems inside structures. Two buildings of the same size can need very different designs, so we never copy and paste a quote.

Speak to an engineer todayCall our Darlington head office or our London office.

What Standards and Safety Measures Do We Follow?

Our work must meet building regulations, insurer requirements and BS EN 62305. We only sign off a compliant system, and we assist with insurer paperwork when you need it. Safety measures on site include roof access checks, safe working at height and clear notice of any short break in power supply.

Regular checks are essential, so we also undertake periodic inspections and supply you with written records. Skipping them is how a good system quietly goes bad.

Engineer in a harness standing on a metal standing-seam roofSafe working
Engineer in a cherry picker basket high on a pale building facadeProcess

How Does Our Process Work From First Call to Certificate?

You tell us about your site and your access requirements, such as roof access, opening hours and alarm settings. We visit, carry out the assessment and send a clear price. We plan each job for efficiency, so we are not on site longer than needed. Then we agree a date that suits you.

We undertake the work at times that suit your site. Our specialist crew installs the system, checks every joint and the complete earth connection, then hands over your certificate. You get peace of mind plus proof for your insurer.

Need a price?Send the site details and we will come back with a clear price and a date.

Why Do Homes and Businesses Choose Our Team?

Our team is fully trained, qualified and used to older and newer structures alike. We have the knowledge to spot weak earth connections, corroded fixings and missing bonds that others walk past. You deal with specialist people, not a call centre.

As lightning protection contractors, we explain things in plain words. Our solutions are built around your site, your budget and your insurer. You get honest advice, even when that means a smaller job than you expected.

Sam, our director and senior engineer, on rope access beside a roof ridgeOur team

How Much Does Lightning Protection Cost?

These are our rough prices based on recent projects:

  • Risk assessment: from £300 to £800
  • Inspection and earth checks: from about £200 for a small property
  • Whole-property surge protection: £250 to £800
  • Detached house or period home: £1,500 to £3,500, with most near £2,500
  • Small commercial site: £4,000 to £10,000
  • Large industrial site: £12,000 to £50,000 or more

Height, roof shape, materials, access and the level of cover all move the price.

The price is a rough guide and the actual cost varies from site to site. Please use our contact form for an accurate quote.

Rear of a branded Lightning Protection Testing UK van in a works yardFree quote

Get Your Free Lightning Protection Quote From Lightning Protection Testing UK Today

We give you a free quote with no pressure. Tell us about your property, and we will tell you what it needs before the next thunder storm. Contact us today and let us discuss your site.

BS EN 62305Testing, installation and maintenanceOne team for the whole job, from the risk assessment to the certificate.
NationwideOffices in Darlington and London
SSIP approvedCHAS, PQS and Constructionline Gold
Pre-qualified, safety approved and ready for your supplier list Constructionline Gold, CHAS and PQS approved under SSIP, with CSCS-carded engineers and IPAF membership for access work. Send us your site and we will send you a price.
  • Constructionline Gold Member
  • CHAS Standard
  • PQS Health & Safety Approved
  • SSIP Registered Member
  • CSCS
  • IPAF Member
Questions

About Lightning Protection Testing UK: FAQs

How much does lightning protection cost for a house in the UK?

Lightning protection for a house in the UK costs roughly £1,500 to £3,500 for a detached or period home, with most near £2,500. This is a rough guide and the actual cost varies from site to site, so please use our contact form for an accurate quote.

How much does lightning protection cost for a business?

Lightning protection for a business costs roughly £4,000 to £10,000 for a small commercial site and £12,000 to £50,000 or more for a large industrial site. These figures are a rough guide and the actual cost varies from site to site, so please use our contact form for an accurate quote.

What does a lightning protection company do?

A lightning protection company designs, installs and tests systems that give a strike a safe path to earth. At Lightning Protection Testing UK, our specialist engineers also fit surge protection and look after each job from the first visit to the final certificate.

Does a lightning protection system attract lightning?

A lightning protection system does not attract lightning. It catches the current and carries it safely into the ground, which cuts the chance of fire, dangerous sparking, data loss and harm to people, although no system can promise a structure will never be struck.

Do I need surge protection as well as lightning protection?

Yes, you need surge protection as well as lightning protection, because a strike can push damaging voltage spikes along power, phone and data cables even when the roof is untouched. We often fit coordinated Type 1, Type 2 and Type 3 devices at different points to give your electronic equipment better protection.

Will a lightning protection company give me a certificate for my insurer?

A lightning protection company like ours hands over a certificate once we have checked every joint and the complete earth connection. We also assist with insurer paperwork, so you have proof of compliant work whenever your insurer asks for it.

Free quote

Get a free quote from our team

Tell us where the building is and what you need. An engineer replies with a price and the next available date.

Photos, PDFs, Word, Excel or text files. Up to 5 files, 10 MB in total.

We only use your details to reply to this request. See our privacy policy.

Our offices
  • Darlington Head Office
    132 The Broadway, Darlington DL1 1EL
    01325 787271
  • London Coming soon
    020 3417 2181
  • Manchester Coming soon
  • Edinburgh Coming soon

Email info@lightningprotectiontestinguk.co.uk

Get a free quote